Specifications > Printer Specifications (iPF6350-14-1)

14. 1. 1. Specifications > Printer Specifications >
Specifications

	Important
	• The following values may vary depending on the operating environment.

Printer

Power supply		100–120 V AC (50/60 Hz), 220–240 V AC (50/60 Hz)
Power consumption	During operation	100 W max.
	Sleep mode	100–120 V: 6 W max.
	Sleep mode	220–240 V: 7 W max.
	Off	1 W max. (*1)
Operating noise (*2)	During operation (sound pressure level/LWAd)	Approx. 47 dB (A) (6.4 bels)
Operating noise (*2)	Standby	35 dB (A) max.
Operating environment	Temperature	15–30°C (59–86°F)
Operating environment	Humidity	10–80%, non-condensing
Dimensions (W × D × H)	Printer only	1,177×670×344 mm (46.3×26.4×13.5 in)
Dimensions (W × D × H)	With stand	1,177×870×991 mm (46.3×34.3×39.0 in)
Weight (Not including printheads or ink tanks)	Printer only	51 kg (112.4 lb)
Weight (Not including printheads or ink tanks)	With stand	66 kg (145.5 lb)
Space for installation (*3)	Printer only	1,477×1,770×644 mm (58.1×69.7×25.4 in)
Space for installation (*3)	With stand	1,477×1,970×1,291 mm (58.1×77.6×50.8 in)
Applicable standards	International Energy Star, Law on Promoting Green Purchasing (Japan), GPN, EU RoHS, The Eco Declaration (Europe), WEEE, U.S. presidential directives, Chinese RoHS

*1: The printer uses a trace amount of power even when turned off. To stop all power consumption, turn off the printer and unplug the power cord.

*2: Calculation based on ISO 7779. Operating conditions: On the Main sheet of the printer driver, Media Type > Coated Paper, Advanced Settings > Print Priority > Image, and Print Quality > Standard.

*3: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300 mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only when printing from the Front Paper Feed Slot, leave 1,300 mm (51.2 in) of unobstructed space in front of the printer and 700 mm (27.6 in) behind it.

Printing performance

Print method	Bubblejet
Maximum resolution	2400 dpi horizontally (*1) × 1200 dpi vertically
Printhead	PF-05 ×2
Number of nozzles	2,560 per color

*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.

Interface

Hi-Speed USB	Format	Internal port
	Mode	Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
	Connector	Series B (4-pin)
Gigabit Ethernet	Format	Internal port
Gigabit Ethernet	Specification	IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/Auto-Negotiation, IEEE 802.3ab1000Base-T/Auto-Negotiation, IEEE 802.3x Full Duplex

Ink

Paper

For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See Paper Reference Guide.)

Paper width	Rolls		203.2–610 mm (8.0–24.0 in)
	Sheets	Top Paper Feed Slot	203.2–610 mm (8.0–24.0 in)
		Front Paper Feed Slot(*4)	250–610 mm (9.9–24.0 in)
Minimum paper length	Rolls		203.2 mm (8.0 in)
	Sheets	Top Paper Feed Slot	279.4 mm (11.0 in)
		Front Paper Feed Slot	350 mm (13.8 in)
Maximum printable length (*1)	Rolls		18 m (19.7 yd)
	Sheets	Top Paper Feed Slot	1,600 mm (63.0 in)
		Front Paper Feed Slot	914 mm (36.0 in)
Thickness	Rolls		0.07–0.8 mm (0.0028–0.031 in)
	Sheets	Top Paper Feed Slot	0.07–0.8 mm (0.0028–0.031 in)
		Front Paper Feed Slot	0.5–1.5 mm (0.020–0.059 in)
Roll maximum outer diameter			150 mm (6 in) or shorter
Supported paper core inner diameter			2 inches / 3 inches
Paper Size	Rolls		8-in. Roll (203.2mm), 10-in. Roll (254.0mm), JIS B4 Roll (257.0mm), ISO A3/A4 Roll (297.0mm), 300mm Roll (300.0mm), A3+ Roll (329.0mm), 14-in. Roll (355.6mm), 16-in. Roll (406.4mm), ISO A2/A3 Roll (420.0mm), 17-in. Roll (431.8mm), JIS B2/B3 Roll (515.0mm), ISO A1/A2 Roll (594.0mm), 24-in. Roll (609.6mm)
	Sheets	Top Paper Feed Slot	ISO A1, ISO A2, ISO A2+, ISO A3, ISO A3+, ISO A4, ISO B2, ISO B3, ISO B4, JIS B2, JIS B3, JIS B4, 22"x34"(ANSI D), 17"x22"(ANSI C), 11"x17" (Ledger), 13"x19" (Super B), Letter (8.5"x11"), Legal (8.5"x14"), 24"x36" (ARCH D), 18"x24" (ARCH C), 12"x18" (ARCH B), 9"x12" (ARCH A), DIN C2, DIN C3, DIN C4, 20"x24", 18"x22", 14"x17", 12"x16", 10"x12", 10"x15", US Photo 16"x20", Poster 20"x30", 13"x22", Poster 300x900mm
		Front Paper Feed Slot	ISO A1, ISO A2, ISO B2, JIS B2, 22"x34"(ANSI D), 17"x22"(ANSI C), 24"x36" (ARCH D), 18"x24" (ARCH C), DIN C2, 20"x24", 18"x22", Poster 20"x30", 13"x22"
Print area	Normal size		Printable area • Sheets ( Top Paper Feed Slot ) 3 mm (0.12 in) from the top, 3 or 23 mm (0.12 or 0.91 in) from the bottom, and 3 mm (0.12 in) from the left and right sides (The bottom margin varies depending on the type of paper.) • Sheets ( Front Paper Feed Slot ) 3 mm (0.12 in) from the top, 23 mm (0.91 in) from the bottom, and 3 mm (0.12 in) from the left and right sides • Rolls 3 mm (0.12 in) from each side For information on the recommended print area, see "Print Area (14.1.2)."
	Borderless printing (*2)		Printable area (rolls) 0 mm from the top, 0 mm from the bottom, and 0 mm from the left and right sides
Supported width for borderless printing			10-in. Roll (254.0mm), JIS B4 Roll (257.0mm), 14-in. Roll (355.6mm), 16-in. Roll (406.4mm), ISO A2/A3 Roll (420.0mm) (3), 17-in. Roll (431.8mm), JIS B2/B3 Roll (515.0mm), ISO A1/A2 Roll (594.0mm)* (3), 24-in. Roll (609.6mm)*

*1: Varies depending on the operating system or application.

*2: Printing may not be possible in some cases, depending on the type and size of paper.

*3: Borderless printing requires the Spacer for Borderless Printing.

*4: POP Board, etc. for heavyweight paper.

Hard Disk

Hard disk capacity	160 GB
	Personal mail boxes (Permanent storage area)	92 GB
Print job storage capacity	Common Box	100 jobs
	Personal Boxes	100 jobs

14. 1. 2. Specifications > Printer Specifications >
Print Area

A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless printing, the actual printing area corresponds to the paper size minus the space for this margin.

		Printable Area			Recommended Print Area
		Top Edge	Bottom Edge	Sides	Top Edge	Bottom Edge	Sides
Sheets	Top Paper Feed Slot	3 mm (0.12 in)	3 or 23 mm (0.12 or 0.91 in)	3 mm (0.12 in)	20 mm (0.79 in)	23 mm (0.91 in)	5 mm (0.20 in)
Sheets	Front Paper Feed Slot	3 mm (0.12 in)	23 mm (0.91 in)	3 mm (0.12 in)	20 mm (0.79 in)	23 mm (0.91 in)	5 mm (0.20 in)
Rolls		0 or 3 mm (0 or 0.12 in)	0 or 3 mm (0 or 0.12 in)	0 or 3 mm (0 or 0.12 in)	20 mm (0.79 in)	5 mm (0.20 in)	5 mm (0.20 in)

Sheets

•Printable Area

Printing from the Top Paper Feed Slot requires a margin of 3 mm (0.12 in) on top, 3 mm (0.12 in) or 23 mm (0.91 in) on bottom, and 3 mm (0.12 in) on the left and right sides. Some types of paper require a bottom margin of 23 mm (0.91 in). For more information, see the Paper Reference Guide. (See "Types of Paper (6.1.1).")

Printing from the Front Paper Feed Slot requires a margin of 3 mm (0.12 in) on top, 23 mm (0.91 in) on bottom, and 3 mm (0.12 in) on the left and right sides.

•Recommended Print Area

A margin of 20 mm (0.79 in) on top, 23 mm (0.91 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.

	Important
	• Choosing a bottom margin of 3 mm (0.12 in) may distort images by the bottom edge. In this case, select Paper Source > Manual and specify a bottom margin of 23 mm (0.91 in).

	Note
	• Printable area: The area that can be printed. • Guaranteed Print Area: We recommend printing within this area. • To print so that your original matches the print area exactly, use an oversized paper size that includes the required margin. (See "Printing on Oversized Paper (2.5.1).") • When printing from the Top Paper Feed Slot, you can choose a bottom margin of either 3 mm (0.12 in) or 23 mm (0.91 in). Specifying Paper Source > Manual in the printer driver leaves a bottom margin of 23 mm (0.91 in). On the other hand, choosing Manual (3mm margins) in Paper Source sets the bottom margin at 3 mm (0.12 in), which provides a larger area for printing. However, Manual (3mm margins) is not available with the following paper. • Fine Art Photo Paper • Fine Art Heavyweight Photo Paper • Fine Art Textured Paper • Types of paper are subject to change. For details on types of paper, see the Paper Reference Guide. (See "Types of Paper (6.1.1).")

Rolls

•Printable Area

A margin of 3 mm (0.12 in) on all sides is required. During borderless printing, the margin on all sides is 0 mm. For information on paper compatible with borderless printing, see the Paper Reference Guide. (See "Types of Paper (6.1.1).")

•Recommended Print Area

A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.

	Note
	• Printable area: The area that can be printed. • Guaranteed Print Area: We recommend printing within this area. • To print so that your original matches the print area exactly, use an oversized paper size that includes the required margin. (See "Printing on Oversized Paper (2.5.1).")